Webtrax l-zmLMLOJk9sboi_41LQNzfcD-0 SEPA85 SEPCO Solar Power Assembly

Contact Us TodayFor Your FreeNo Obligati

Download our FreeSolar Lighting Guide

Download our Guideon How Solar Lighting

SEPCO SEPA85 Solar Power System

SEPA85

System Features:

  • The SEPA85 solar electric power assembly features a 85 Watt solar panel, full protective panel pan, and single support power bracket.
  • The 82 Amp hour battery is contained within a vented aluminum battery box and includes a wiring harness and control electronics.
  • There are 14 different controllers to chose for different types of applications such as dusk to dawn dusk activated, motion detector, etc.
  • The systems are built for easy installation with quick connect terminals and can be mounted to a wall, roof, or pole.
  • Every system is available to produce DC or AC power depending on the needs of the device.
  • Meets AASHTO 150 mph wind force ratings.
  • Powder coating and custom design available.
  • 5 year maintenance free and system warranty.

Panel Assembly

A 85 Watt single array consists of one 85 Watt module which is integrally mounted upon and power riveted to a vented aluminum panel pan featuring full panel backside damage prevention, welded substantial aluminum mounting rails, power riveted aluminum end rails and terminated in pre-wired 3 prong Molex type connector. Solar array produces 5 amps charge current and measures 47.3”L x 20.8”W x 2.1”D. The array has a 10 year warranty for 10% power loss and 25 year warranty for 20% power loss. Solar array has a life cycle testing and actual field proven life of over 30 years.

Battery Assembly

A vented aluminum box containing an 82 amp hour sealed GEL battery which is integrally mounted and pre-wired to include a standard wire harness with simple plug in connections for the SEPCO LCU1 Lighting Computer/Control Unit and the solar panel assembly. The low profile design contains a preformed and welded back mounting plate for easy slide on attachment to the power bracket. Battery assembly contains SEPCO unique “Through the Pole” rear wire routing output for no exposed wiring to provide a neat clean appearance for the finished installation. Battery assembly is complete with all stainless steel mounting hardware. All metal crafting has been performed by high speed robotic presses using computer programmed instructions.

Power Bracket

An all aluminum, unique single support 5/15/45 degree power bracket consists of a substantial aluminum channel affording mounting to any pole or wall. Circumference welding of strong schedule 40-.25” aluminum pipe in a single support arrangement to provide maximum strength for wind loading. The power bracket contains predrilled and tapped battery slide mount bolts of stainless steel and two 11/16” mounting holes for utility standard 5/8” mounting bolts. The bracket contains the unique “Through the Pole” battery wire hole for no exposed system wiring.

The SEPCO solar electric power assemblies have proven themselves as the most rugged and robust design in thousands of installations worldwide since their introduction in 1994. SEPCO systems surpass all codes, compliances, and quality controls.

Download Printable PDF