<img src="https://www.webtraxs.com/webtraxs.php?id=sepconet&amp;st=img" alt="">
Skip to content
772-220-6615         info@sepconet.com         CADDetails

Just a Little More LED Lighting Knowledge (Video)

SEPCO 12/23/14 2:21 PM
Just a Little More LED Lighting Knowledge

So I was browsing the internet looking for one final post to write for the year (well, writing now, not publishing last, but anyways) and I came across this great video from a Google Hangout between Lisa Reed from Envision Lighting Design and Greg Aranda from Graybar. The original post is Shedding Light on LED Lighting and it is a great article that goes over the new LED technology and some basic information. The video at the end of the post, or just below, shines even more light on the topic of LEDs and I wanted to share this information with you all.


There is some really great information in this 38-minute presentation; however, here’s a quick overview of what is covered.


Lisa goes over some great facts about LEDs, including the lower energy consumption, lasting longer lighting, and the lower maintenance factor. She even goes as far as showing a side-by-side comparison of LEDs vs HID lighting output and showing that not every light is the same. Finally, she goes through the metrics you need to consider for LED lights.


LED_Lighting_CityLight Energy Metrics:

  • Candela (CBCP) – The light energy leaving in one specific direction
  • Lumen – The total light energy leaving a fixture
  • IES Files – Lighting calculation files from the Illuminating Engineering Society
  • BUG – Backlight, Uplight, Glare which replaces cutoff ratings for outdoor lighting

Electrical Metrics:

  • Watts – Power consumption
  • Efficacy – Lumens per Watt
  • Efficiency – Percent of total Lumens that leaves a fixture (Not used with LEDs)
  • Power Factor
  • Input Voltage
  • THD – Total Harmonic Distortion
  • UL/ETL/CSA – Independent lab tests for safety

Cost Metrics:

  • Initial Cost
  • Lifetime Cost
  • Warranty

Performance Metrics:

  • Projected Life
  • Dimmability
  • Flicker

The video goes on to explain the Color Temperature (CCT) and understand how the lighting varies between different color temperatures and how this affects the visibility of different lights. This moves along into explaining the Color Rendering Index (CRI) and how this is an older way of determining lighting, and now we need to use the R9 value as well as the standard CRI ratings. Finally, dealing with the color of lighting, the Spectral Power Distribution (SPD) is covered to show the difference between different lighting types and how LEDs fall into this.


Finally, she compares old style lighting, both indoor and outdoor, to what is available in LEDs today. There is lots of great information in this section on replacing fixtures and lamps indoors and outdoors so you have a better understanding of what to look for.


After the presentation, Lisa and Greg do a great Q&A and go over some other developments in LEDs. They went over some new applications for LEDs to help with mood and therapy, and having companies such as clothing stores use the lights to simulate the lighting that would be achieved during specific events, such as outdoor lighting for bathing suits or evening lighting for trying on dresses.


All in all – great video. Go check it out above.


2017 Solar Lighting Design Guide CTA